Many consumers don`t know how to install the custom crystal chandelier after they buy it. They even ask the installer to install it in person. In fact, we can install it by ourselves. So what are the detailed steps for chandelier installation? The following editor will take everyone to learn in detail how to install the chandelier, let's learn together! 1. The boom can be used directly out of the ceiling and the method of adding casing pipes. The method of adding pipes is conducive to installation and can ensure the integrity of the ceiling panel. Only drill holes where the pipes need to be exited. The hanging cup directly out of the ceiling makes it difficult to align the board surface when it is installed. Sometimes it is possible to install the boom first and then cut off the panel to dig holes for installation, but this will affect the decorative effect. 2. If there are multiple chandeliers during installation, pay attention to their position and length relationship. You can install the chandeliers while installing the ceiling, so that the position and height of the lights can be adjusted based on the ceiling joists.

Is the crystal on the crystal chandelier real natural crystal, and what is the difference between crystal and glass? The impression that crystal gives us is crystal clear, while the feeling that glass gives us is transparent. Because natural crystals are expensive, have many defects, are not suitable for batch use, and are seriously inadequate in resources, the crystals on modern crystal lamps are synthetic products, regardless of whether they are imported or domestically produced. It is composed of glass and part of metallic lead. When the content of lead in the glass reaches 24%, it can be called crystal in the sense. The role of lead is to make the glass more transparent, and the colorful light refracted by natural light. Also strong.

Is the giant crystal chandelier only in the homes of rich people? No, there are also on stage. As a stage designer, you have to learn about these giant crystal chandeliers on stage. This version of "La Traviata" was staged at the Handa Opera House on Sydney Harbour. This is a huge water stage with huge chandelier suspended on a 26-meter-high crane. Stage design designer Brian Thompson is responsible for this minimalist but very powerful stage design. This giant crystal chandelier is composed of 10,000 Swarovski crystals and 3,000 LED lights. Compared with the normal crystal chandelier, it has become a 9-meter-high and 9-meter-wide sculpture installation. The crystal chandelier in "The Phantom of the Opera" should be an "important member" of the stage crystal chandelier circle. Its shock and classic degree will probably be unforgettable for anyone who has seen it. The crystal chandelier with its chains cut off flew over the auditorium and finally hit the stage. It can be said to be the most thrilling climax of the whole show. The chandelier weighs 0.5 tons, and different performance versions have different falling speeds. When this giant chandelier "suddenly brakes" above the audience's head, the closest distance to the audience is only 1.5 meters. It is really thrilling and exciting. Praise: Good light!

Sometimes, when we visit other people's homes, we will see a huge custom-made chandelier quietly standing in the middle of the house as soon as we enter the door. Some chandeliers blend in with the living room just right, which makes us amazed, while others are extremely blunt and obtrusive. So why does this happen? The division of chandelier: according to the appearance style, chandelier can be divided into classical European style and modern pendant style. Color matching of crystal lamp: Whether the pendant specifications of the chandelier are unified is of great importance. The reason why the chandelier can shine with dazzling light and show the gorgeous and noble temperament is all dependent on a whole body of crystal pendants. If the pendants are of different sizes and shapes, it will inevitably affect the overall beauty of the chandelier. If the holes of some imitation chandelier pendants are not standard, or have sharp edges, abrasion, and different sizes, they will not only affect the appearance, but also easily crack. If the pendant lights fall from the ceiling, it will pose a threat to family members. Consider the overall decoration style: choose the appropriate chandelier style through the decoration style, and because the chandelier lighting is often larger in shape, the living room is required to be more spacious, and the height of the living room is also required. Comparison of the living room If the living room is relatively short, the lighting will feel redundant, and the lighting in the living room will not be evenly illuminated.

Real estate developers often hope to create professional sales centers with different decoration styles, so that every customer can negotiate and sell their houses in a higher-end environment. Lamps and lanterns are an essential part of decoration. The lamps and lanterns of the sales department need to be carefully selected, which can not only achieve the lighting effect, but also an important part of the decoration. So, how can we create an elegant and high-end environment? The benefits of custom lamps for the sales department are: custom-designed lamps for customers, matching suitable lamps according to the needs of the sales department. According to the actual space size of each major area of the sales department, the developer can request the lighting manufacturer to customize the lamps of reasonable size and specifications. The appropriate sales department lamps can make the overall decoration effect of the sales department even higher. The style and style of the lamps in the sales department can be selected by yourself, for example: large-scale sales department crystal lamps, modern large ceiling chandeliers, retro iron chandeliers and other sales department lamps. Meet the decoration style needs of the sales office. Developers and owners can choose more suitable materials according to the project cost budget. Different materials have a great influence on the overall effect of the lamp. Guangdong Longwest Lighting Co., Ltd. provides customers with high-quality one-stop service for engineering lighting, covering lighting design consulting, lighting selection schemes, product production, coordinated transportation, installation guidance, after-sales maintenance, etc. We look forward to working with you Cooperation!

Non-standard customization is also non-standard design, which means non-standard size design. According to customer requirements, without changing the product quality, the lamp style or width, height, and thickness can be changed within a certain range; the original lamp body can be replaced with other types of lamp bodies, etc. In this era of personalization, the word customization is mentioned in various industries and social groups. From a piece of living utensils to a piece of luxury goods, this is becoming more and more popular with the rapid progress of human industrialization, lighting customization is no longer the privilege of the rich, more and more ordinary social groups Also joined the ranks. In the customization process, what should be paid attention to and how to choose a manufacturer. The origin and development of lighting customization Lighting customization is not just the production of lighting styles, but also customization covering various aspects such as creative design, structural design, production technology, packaging and logistics. Such customized services have been popular in Europe, America and Japan for many years. Mass customization is a new production mode that has been popular in domestic and foreign manufacturing industries in the past ten years. It responds quickly to the needs of individual customers with agile operations. As a durable consumer product, the function of lamps is not only material, but also spiritual. People are very individual when they buy lamps. When choosing high-end club lighting, star-rated hotel lighting, high-end catering lighting, real estate model room lighting, and villa lighting lighting solutions, many require lighting customization. Without customization, it is difficult to fit the style, size, and individual needs of the spac

In an ideal society, chandeliers play a role in lighting for us in the dim night. Of course, different custom chandeliers also perform some decorative functions, making the living room more appreciative. So how to choose the living room chandelier? How to choose custom chandelier Size and power: When buying led chandelier commonly used in homes, we should look at the detailed model of the material. Because the space in each room is different, the model used is different. If we want to reasonably match the brightness in the room, Can consult the sales staff of the lighting store, the ordinary living room will use the diameter of 60-80 cm, each lamp holder is equipped with 5-7W bulbs. In the restaurant, you will choose a combination of 3 heads, one 3W on each side, and one 5W in the middle. Look at the light source test report: If we don't know the quality of the lamp when choosing the lamp, it can actually be the result of the test report. The general manifestation index must be at least 80. At the same time, in order to see how the light source distributed by it can also look at the photobiological safety test. See whether it can save energy: under normal conditions, we all choose energy-saving lamps. After all, we need to light up the room every day. If we choose not energy-saving lamps for a long time, we will waste a lot of electricity bills later, and energy-saving lamps are now decorated They all advocate the purchase of a kind of lighting, so we can give priority to thinking when buying lighting. Look at its appearance: the lighting decorations in the main living room, bedroom and kitchen should also have a certain aesthetics, especially the chandelier with lighting function should be beautiful and tidy.

Today, Longwest Lighting will talk about four aspects. From the appearance, how do crystal lamp manufacturers distinguish between good crystal lamps and fake crystal lamps. 1. Look at the layering of the crystal itself Good crystals are usually more translucent, smooth and bright. Inferior crystals will show bubbles, turn yellow, and even turn black. Or there will be some dark spots, and there is a more obvious color cast in the middle of each lamp ball. 2. See instructions for use Generally speaking, a good crystal will mark the composition of lead monoxide. As you mentioned earlier, the higher the lead content, the higher the grade of the crystal. Generally, the lead content is more than 24%. The more fashionable K9 crystals currently on the market, although not in a strict practical sense, are nothing more than a very good choice in terms of price, light transmission, and actual mapping effects. In terms of general indoor space, people rarely think about Slowart crystals, or even general imported crystals. 3. Look at the quality of lighting fixtures Crystal ball and crystal rod are relatively "cost" items on a crystal lamp, but the lamp panel, hanging chain, lamp source, spraying, electric welding and welding and other hardware and combing processing techniques are also indispensable. In many cases, we can see whether the electric welding and laser cutting of lighting fixtures are smooth and uniform, whether there is deformation, whether there are teardrops, bubbles, etc. in the paint. 4. Look at lighting accessories Just as a piece of clothing will include zippers, buttons, bags and other auxiliary materials, crystal lamps also have many parts, such as flower pins, hanging chains, stainless steel wires, and round buckles. A good long coat is unlikely to be mat

Nowadays, major hotels in China have become more and more strict with the purchase of lighting in order to improve the lighting and overall decoration. Then let's follow the crystal lamp manufacturer Longwest to understand what customers need to pay attention to when choosing crystal engineering lamps. The first point is to consider the reliability of the lamps, and secondly, consider the appearance of the lamps and whether they are consistent with the overall decoration style of the hotel. What customers need to consider is the price. Because many hotels now use customized lighting products, especially in the lobby lighting of the hotel, the lamps required are generally large lamps. It is believed that the overall weight is not low, so customers must put safety first when purchasing. The second is the durability of crystal engineering lights. Generally speaking, in order to meet the needs of the market, hotels will generally do a small and medium-sized renovation and repair in 5 years, and a large-scale overall renovation in about 10 years, so The service life of the lamps and lanterns used in the hotels is required to be ten years or more, so as to meet the requirements of the lamps and lanterns in the hotels. If it is a small and medium-sized enterprise generally does not have sufficient economic conditions, it is generally not possible to replace the lamps for the economic interests of the hotel, especially when the economic range of the manpower and material resources involved is too large, which means that for the crystal engineering lamp When choosing, the place where the lamp is stressed and heated, as well as the fixed components of the lamp, and the quality are all very important. What kind of hotel lamps and lanterns, its function should be conducive to the upgrade of the hotel grade and meet the needs of the gu

1. Wipe method Cleaning the crystal chandelier does not require professionals to disassemble the chandelier. Stand on a high place and wipe gently with a cotton cloth. At the same time, pay attention to your own safety. 2. Clean water method It can be cleaned with clean water. When scrubbing, be careful not to keep the metal fittings in contact with water for a long time to avoid rust or cause hidden dangers. 3. Kerosene method Kerosene is a good solvent and can be cleaned easily. Disassemble the crystal chandelier according to the parts and soak them in kerosene one by one. After 5-10 minutes, gently wipe the surface of the crystal parts with a clean soft cotton cloth. At this time, you can see that the stains have been fully dissolved. Wait until all the stains are cleaned. Then wipe it off with clean water.

What is engineering light Engineering lights: Broadly speaking, the custom-made lights are engineering lights. In terms of industry: lamps that exceed the home lighting type are basically engineering lights, and there are no restrictions on size and material. Engineering lamps refer to customized lighting products suitable for specific lighting products according to the actual needs of the project, and have a decorative effect. They are also called non-standard lamps, decorative lamps, custom lamps, etc. Usually include hotel engineering lamps, non-standard lamps, club lamps, KTV lamps, villa lamps, model room lamps, lobby lamps, outdoor lamps and other custom lamps. "Non-standard" means "not made according to standards". General products, in order to be common with other products (this is for the convenience of use and maintenance), have their own production standards. For example, the "screws" we often use must be standard parts. You can buy screws of the same specification at any store, and you can use them all. "Standards" have the form of national standards, local standards, industry standards, etc., which complement each other. "Non-standard" commodities or spare parts refer to commodities that are used less frequently, or spare parts specially made for a certain commodity, and it is not easy to buy general-purpose or substitutes. Sometimes, "non-standard" parts are deliberately done in order to protect the uniqueness of their production and maintenance.

For us who do non-standard crystal lamps, what we do is not only products, but also creativity and ideas. First of all, creativity is an important way for us to develop. Without creativity, we will not have our unique personality, it will be difficult to form core competitiveness, and we will be caught in fierce competition of homogeneity. Secondly, the concept is the embodiment of the corporate structure and the display of taste. Without ideas, there will be no industry benchmark status, and it will be difficult to break through the traditional limitations, and thus it is difficult to become bigger and stronger. Design is a process in which the lamps and lanterns we planned, planned and envisioned are conveyed through drawings in accordance with the requirements of the hotel. The hotel can provide us with the shape of the lamps we want, or we can design lamps that fit into the space according to the space structure reserved by the hotel. The space reserved by this hotel is a long and narrow space, which can be imagined as a canyon. It is necessary to design the same long and narrow lamps to perfectly construct the beauty of the space.

Functionality of interior lighting design The lighting design must meet the functional requirements. According to different spaces, different occasions, and different objects, choose different lighting methods and lamps, and ensure proper illumination and brightness. For example: the lighting design of the conference hall should be vertical lighting, uniform brightness distribution is required to avoid glare, and integrated lighting fixtures should be used; shop windows and displays usually use strong light to focus on the image of the product. Its brightness is 3-5 times that of ordinary lighting equipment, and directional lighting is often used to enhance the three-dimensional sense and texture of the product, and improve the advertising effect of the product. Aesthetic needs of interior lighting design Lighting is an important means to decorate and beautify the environment and create an artistic atmosphere. In order to decorate the interior space, increase the sense of spatial hierarchy and render the atmosphere, it is also important to choose the shape of the lamp. In the environmental design of modern home buildings, commercial buildings and cultural and entertainment buildings, lamps not only play a role in providing lighting, but also pay attention to their shapes, materials, colors, proportions and proportions, and become indispensable decorations in the interior. Spaces. Lighting designers use various methods (such as transmission, reflection, refraction, etc.) to control the brightness, concealment, ambiguity, intensity and weakness of the light in a rhythmic manner. Therefore, non-standard crystal lamps are used for refraction. Use the brightness and color of the light to create a warm atmosphere. Soft, quiet, innocent, and

With the development of modern society, the consumption pattern has changed from planned shopping to stimulating shopping and experiential consumption. Department store lighting design is not only a pure pursuit of functional illuminating shopping space, but also a humanized shopping space and a good visual atmosphere. , To bring customers a sense of comfort and pleasure to attract customers to buy more goods. The department store lighting project uses different lighting methods and light colors to decorate elements according to people`s visual psychology and aesthetic habits, to guide the department store space, and the distribution of reasonable illuminance creates a humanized shopping environment, which not only focuses on the products The display effect also pays attention to the physical and mental feelings of customers when buying, avoiding glare and minimizing light pollution. The lighting design of department stores creates an atmosphere suitable for customers to choose suitable products through the form of light, highlighting the effect of products. Customized chandeliers can be used in the lobby, and suitable chandeliers can be customized according to the needs of shopping malls. The customization of shopping mall chandeliers also requires height issues. Use the most attractive light and color to make the product display and the texture vivid and vivid, improve and strengthen the brand image of the mall, use LED lamps to achieve the dramatic effect of light and color, and attract the attention of customers through the combination of color and light in the light and the change of light and shadow , Pay attention to the artistic effect and artistic style produced by lighting, and use light and shadow to highlight the environment.

The hotel lobby uses spatial visual architecture design techniques, combined with auxiliary lighting to transition indoor and outdoor light environments to create a comfortable physical and mental experience space, and then integrate the point, line, and surface lighting design and the application of multiple effects to show the hotel's inner beauty. The hotel chandelier is customized. It is the hub for guests to enter and exit the hotel, and it is also an important place to show the hotel's grade and attract guests. The functional zones of the hotel lobby space mainly include reception hall, service desk, guest lounge area, etc. reception hall As the main entrance and exit of the hotel space, the reception hall mainly uses basic lighting. The following points should be noted: (1) According to the decoration requirements, personalized lamps such as large chandeliers and lanterns are generally provided to show the style of the hotel; (2) The reception hall has high illuminance requirements to show the nobility of the guests. At the same time, registration and other reading and writing activities are also carried out in the hall, and the illuminance value is not less than 300Lx. For hotels above four stars, it is recommended to add dimming equipment; (3) For general lighting, embedded downlights are used for gypsophila arrangement; (4) Dark trough lights are often arranged around the pillars and walls to form the effect of hollowing the ceiling; (5) Hotels above three-star level should set up road signs to guide customers where they want to go. Service desk

In general consumers` perception, aren`t crystal lamp manufacturers just factories that produce lamps and sell lamps? What else can they provide besides products? But for some interior decoration companies and Party A customers, what they need is not It's just lamps but also includes these: 1. Information: For a project-type lighting project, then he will need the manufacturer to provide specific product parameter information, inspection information, wiring information, company qualification information, certification information, and so on. 2. Scheme design: The crystal lamp manufacturer can provide a series of example scheme designs such as lighting effect drawing design and lamp layout planning according to customer needs. 3. Construction: For customers who have installation quality and installation team, the manufacturer does not need to be responsible for the installation and construction. They usually just purchase the lamps and install them on their own, but for some customers who are not long-term contact with lighting projects, He needs the manufacturer to plan a complete plan for him until the lighting is successfully commissioned. Crystal lamp manufacturers provide installation guidance and construction services for different customers. 4. After-sales service: After the project is completed, the crystal lamp manufacturer and the customer will sign an after-sales agreement. Any problems during the warranty period can be directly contacted by the after-sales specialist to deal with it in time. We believe this is a problem that our customers are particularly concerned about. Longwest is a high-end custom chandelier brand affiliated to Langliang Lighting Appliance Factory, Guzhen, Zhongshan City. It is located in Guzhen, the capital of lighting. After more than 10 years of exploration and res

1. The benefits of customization of the chandelier in the sales department are also characteristic: tailor-made, tailor-made lamps suitable for the needs of the sales department. 2. The seller can request the lamp manufacturer to customize the reasonable size of the lamp according to the actual size of the sales lobby, so that the lamp and the sales department can complement each other more. 3. The style and style of the lamps in the sales department can be chosen by yourself, such as large modern crystal lamps, decorative lamps of the opposite sex, large retro iron chandeliers, etc. Meet the decoration style needs of the sales office.

1.European style candlestick chandelier Generally, European-style chandelier is more atmospheric in shape and expensive in color, giving people a good temperament as a whole. 2. Crystal Chandelier Crystal chandelier is relatively popular. Its crystal clear crystal and dreamlike lighting effect are not only soft, but also very beautiful. 3.Chinese style chandelier Chinese-style chandeliers have certain limitations on indoor style matching, and the shapes and patterns on the lamps will have a strong classical flavor through the projection of the light source. 4. Fashion chandelier Don't like European style, and don't want to be too classic, then modern style chandelier is the first choice. There are many styles of modern chandeliers on the market, and there is a lot of room for selection, and various lines are available.

In daily life, whether it is a meal or a meal with family and friends, we usually do it in a restaurant. In addition to the layout, color, tables and chairs, tableware, and delicacies that can bring us a wonderful dining experience, the atmosphere created by the restaurant's custom pendant lights can make the dining time more comfortable and warm. So, what kind of lights are good for the restaurant? What is the difference between different lighting effects? How high is the chandelier? Choice of custom pendant lamps Chinese people pay attention to "color, fragrance and taste" when eating, so restaurant lighting is very important. In modern home decoration, the restaurant is often designed to be integrated with the living room or kitchen. The choice of lamps and lanterns should also be coordinated with the furniture and the overall space decoration design style. It must be beautiful and practical, but also unified in style. For example, in Chinese-style home decoration, you can use Chinese-style lamps that condense the precipitation of Chinese culture; Western-style restaurants with larger spaces can choose crystal-clear crystal lamps, plus a unique candle to create an elegant and romantic atmosphere. The shape of the lamp should not be too cumbersome, and it is advisable to use a convenient and practical up and down lamp. The restaurant should generally adopt bright and soft warm color lighting, which can promote people's appetite and increase the fun of dining. Types of chandeliers Chandeliers are commonly used dining room lamps, with single-head, double-head, three-head, combination and other forms. When choosing, the lamp specifications should be determined according to the shape and siz

What is engineering light? Engineering lights: In a broad sense, the custom-made lights are engineering lights. In the industry: lamps that exceed the home lighting type are basically engineering lights, and there are no restrictions on size and material. Engineering lamps and lanterns refer to customized lighting products suitable for specific lighting products according to the actual needs of the project to achieve a decorative effect. They are also called non-standard lamps, decorative lamps, custom lamps, etc. Usually include hotel engineering lamps, non-standard lamps, club lamps, KTV lamps, villa lamps, model room lamps, lobby lamps, outdoor lamps and other custom lamps. "Non-standard" means "not made according to standards". General products, in order to be common with other products (this is for the convenience of use and maintenance), have their own production standards. For example, the "screws" we often use must be standard parts. You can buy screws of the same specification at any store, and you can use them all. "Standards" have the form of national standards, local standards, industry standards, etc., which complement each other. "Non-standard" commodities or spare parts refer to commodities that are used less frequently, or spare parts specially made for a certain commodity, and it is not easy to buy general-purpose or substitutes. Sometimes, "non-standard" parts are deliberately done in order to protect the uniqueness of their production and maintenance.

In museums, lighting design is a very important part. There are many types of exhibits that are sensitive to light. For such exhibits, excessive lighting is a kind of damage. Textiles, paper, dyed leather, animal feathers, grass, plant pigments, animal and plant specimens, layout sketches, etc. are particularly sensitive to light, so there is almost no natural light in the exhibition room where such exhibits are displayed. Light pollution, in a broad sense, refers to the adverse effects of excessive light on human production and living environments. Mainly include the harm of visible light and the harm of invisible light. Need to customize the chandelier, height and width are limited. 1 .Visible light hazard: Visible light refers to electromagnetic waves with a wavelength between 380nm-780nm. Mainly include strong light hazard, laser hazard, light hazard, visual hazard, etc. 2 .Invisible light hazards: Invisible light refers to electromagnetic waves with a wavelength less than 380nm or greater than 780nm. Mainly refers to the harm of ultraviolet and infrared rays. Customized chandeliers, as far as the museum display area is concerned, mainly include: the harm of light radiation to exhibits, the adverse effects of light on human activities, and the light pollution caused by excessive light radiation on the space environment. Therefore, for museums, lighting design without light damage must be carried out.