1.Wiping the hotel Crystal Chandelier: When wiping the beads, be sure to have a soft cloth dipped in water diluted with detergent, and gently wipe the front and back of the crystal beads at the same time (do not pinch the beads and pull down when wiping, so as not to pull Broken beads).
2. Keep the balance of the lamp body: If you want to remove all the bead strings and clean them, pay attention to the balance of the lamp body when removing the bead strings. The outer frame is deformed; it should be disassembled in front, back and left.
3.Wipe the bracket Accessories: When wiping the bracket and accessories, the soft cloth should not be dipped in water, especially alcohol water, so as not to damage the protective film outside the electroplating layer and affect the surface gloss of the lamp holder.
4.Note: When wiping the lamp holder, cut off the power; the bulb should be removed and wiped clean and then installed; the bulb should be properly screwed in, too loose will cause poor contact; too tight may damage the bulb, think crystal The lamp gives full play to its effect, choose ordinary transparent bulbs instead of frosted or colored bulbs.
5. Replace the accessories in due time: It is found that the beaded connection buckle is rusty and discolored, one is not beautiful, and the other is easy to be brittle. Replace it by the way; if the bead is found to be defective, it should be filled in time.
6.Purchase a special cleaning agent and spray it on the crystal lamps. The cleaning agent will volatilize along with dust and stains. You can also remove the crystal pendant and soak it in kerosene. After the stains are softened, wash it with washing powder and air dry. Install it.
